Express delivery and free returns within 7 days See details
Shop By Department
- Home
- CentIoT - W1209WK W1209 WK W1219 DC 12V - LED Digital Temperature Controller Thermostat for incubator - with waterproof NTC Sensor
Product Categories
- Development Boards(0)
- Audio and Video(23)
- Accessories Tools Cases (0)
- Connectors and Cables(0)
- Thermal Management(57)
- All Categories ()
- Motors And Drivers(15)
-
Wireless Communications(36)
- Top Brands
- (G)FSK Front-End Modules
- 2.4G Front-End Modules
- ASK Modules
- LoRa & LoRaWAN Modules
- LoRaWAN Gateway & Node
- BLE & GPS & 125kHz Wakeup Modules
- RF antennas
- 3D Pedometer Modules & Chips
- Transparent Wireless UART Modules
- Walkie Talkie & Wireless audio
- Wireless IO & 4-20mA Modules
- SENSOR MONITORING GATEWAY AND NODE
- Power Supply and Converters(21)
- Test, Measure and Inspect(0)
Featured product
Description
Brand: CentIoT
Color: Black
Features:
- Temperature range : -50 to 110 °, High temperature protection: 0-110°
- Temperature control mode: ON / OFF, Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Resolution:When temperature is 0.1°, the resolution is -9.9~99.9, other temperature segment is 1°
- Control accuracy: 0.1 °, Hysteresis accuracy: 0.1°, Refresh rate: 0.5S; Hole size:46 x 26.5mm
- Supply voltage: DC 12V, Static current: ≤ 35MA, attract current ≤ 65MA, Output voltage: DC 12V, Output power: 20A relay
PartNumber: DIGITAL-THERMOSTAT
Details: Features: Modeling simple, elegant, LCD panels inline connections, moisture-resistant, strong anti-interference, applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment. Instructions: 1. Please pay attention for your first use. You need wait 6s after your setting data, the module will save the date you have set after 6s. 2. Short press button SET: If you start the time setting mode , Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s 3. Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1,you could set the timing mode by the button+ and button-. P0--0: timing mode is 0--999 seconds P0--1: timing mode is 0--999 minutes P0--2: timing when the pattern is 0--999 P1--0: T1 time delay relay (T1 timer) P1--1: T1 delay time relay releases (T1 timer) P1--2: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timing) ends. P1--3: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timing) ends. P1--4: time delay relay after T1 (T1 timer), then the delay time T2 successor electrical release (T2 timer), repeat the cycle. P1--5: T1 delay time relay releases (T1 timer), then the delay time T2 successor Electric energized (T2 timer), repeat the cycle.
UPC: 679043313851
EAN: 0679043313851
Model: SE160-W1209WK-12V
Item Condition: New
Additional Information
Shipping & Return
Reviews
Related Products
Recently viewed products
Copyright © Bucketlist Trading Pvt. Ltd. All Rights Reserved.
Shopping cart
close
-
WHAT ARE YOU LOOKING FOR?Search
- Login / Register
- Home
- Shop New
- page
- Blog
- Wishlist (0)
- Compare (0)
- Contact Us